Better Built Garage Doors   

  Give us a call today for our affordable rates and Free Estimates on New Garage Doors!
  425-825-1209 or 800-825-1209   Contact Us
    

Home

 Garage Doors

 Garage Door Openers

 Accessories

 About Us

 Specials

 Repairs & Services

 Service Area

 Customer Reviews

 Contact Us

 Rebates & Tax Credits

 What Not To Do

 Maintenance

 Recommended Contractors

Before & After Pictures
 
Raised and Recessed Panel Wood Garage Door Product Information
 

Northwest Door Rasied Panel Wood Garage DoorsCONSTRUCTION: Door frames are constructed using 1-3/8" thick finger-jointed West Coast Hem/Fir with Mortise and Tenon stiles and rails. Choose from these recessed 1/4" panel materials, Luan Mahogany Plywood Panels (Model 321), Rough Sawn Fir Plywood (Model 326), and Tempered One Side Hardboard Panels (Model 322). Raised panels are 3/4" thick, Hem/Fir Panels (Model 323), MDF Panels (Model 327), Clear Cedar Panels (Model 328), and Redwood Panels (Model 324). Also available, the All Cedar Raised Panel Door (Model 828) manufactured with solid Western Red Cedar Frame and Clear Western Red Cedar Panels.

NOMINAL SPECIFICATIONS:

  • Frame thickness: 1-3/8"

  • Top & Bottom Rail widths: 4-7/8", Meeting Rail Width combined: 4-1/2"

  • End Stile width: 4-1/2", Center Stile width: 2-5/8"

  • Raised Panel thickness: 3/4"

  • Finish: Face sanded ready for finish

  • 1 Year Limited WarrantyNWD Warranty

 
Standard Widths: 8' - 0" 9' - 0" 10' - 0" 12' - 0" 16' - 0" 18' - 0"
Panels Horizontally: 2, 3, 4 2, 3, 4 3, 4 3, 4, 6 4, 5, 8 5, 8

 

Standard Heights: 7' - 0" 8' - 0" 9' - 0" 10' - 0" 12' - 0" 14' - 0"
Recessed Panels Vertically: 4, 5 5 5 5 6 7
Raised Panels Vertically: 5 6 7 8 9 11

Raised panels can not exceed 11 - 1/2" in height

Options:

  • Widths up to 18', heights up to 14', in one inch increments

  • Solid Rail West Coast Hem/Fir Wood Frame (more suitable appearance for staining)

  • Mahogany and other select woods are available (special order)

  • Flush Back of bottom section with 1/4" Luan Plywood (increases rigidity of door)

  •  Flush Back of door 1/4" Luan Plywood & Insulate with 5/8" Polystyrene Insulation

  • Laminated Panels, 1/8" Plywood is pressure laminated to the back to help avoid splitting

  • Designs, see "Design Page" this section

  • Clear and clear obscure glass

  • Low clearance, high lift and vertical lift track and hardware

 

HARDWARE: 15" or 12" radius torsion hardware; track is 2" bracket mounted. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.
 
Back to Raised and Recessed Wood Garage Doors
Servicing the Greater Seattle area including Bellevue, Redmond, Kirkland, Issaquah, Sammamish, Duvall, Monroe, Mercer Island, Medina, Bothell, Snoqualmie, Newcastle, Lake Forest Park, Lake City, Everett, Edmonds, Lynnwood, Millcreek, Woodinville, and Snohomish Area Complete Service Area
Better Built Garage Door LLCPowered By Better Built Door Media
Copyright©2010 All rights reserved Better Built Door LLC